A dark, low-key photograph of a vintage workbench with scattered electronic components, coiled wire, and an old soldering iron, lit by a single warm lamp against deep shadow.
A dark, moody still-life composition with antique books and technical instruments on a wooden surface, warm sepia tones against near-black shadow.

Allen's Site

A personal corner of the web — electronics, DIY projects, vinyl transfer, and stories from a retired French engineer.

Explore the Blog

How to Create a CUE Sheet for Your Ripped Album

A CUE sheet is a small plain-text file that tells compatible audio software how an album is arranged. It can identify the performer, album title, individual tracks, pauses and the exact points where songs begin. When paired with one continuous audio image, it can recreate the structure of a CD much more accurately than a folder of unrelated files.

This is especially useful when transferring LPs or cassette tapes to a computer. A record side or cassette side is often captured as one long WAV file, while a CUE file supplies the track divisions. You can then play the album continuously, split it into tracks, write a CD or retain the original recording as an organised digital archive.

The method also suits commercially released CDs ripped as a single image. Australian listeners may still use older CD players in a car, keep a collection for family listening, or buy second-hand records through local markets, op shops and websites such as Gumtree. A correctly prepared cue sheet preserves the sequence and spacing that separate files can lose.

Before starting, decide which audio file will be the long-form master. Choosing a digital master can help you weigh WAV, FLAC and other formats. For a straightforward audio CD project, an uncompressed 44.1 kHz, 16-bit stereo WAV remains widely compatible, although a lossless archive may be preferable for long-term storage.

Why A Cue Sheet Matters

A CUE sheet is not the music itself. It is a set of instructions, usually saved with a .cue extension, that points to an audio file and describes its contents. Burning software reads those instructions to decide where each track begins and whether a pause or pre-gap should be inserted.

This matters for albums designed as a complete listening experience. Classical works, live recordings, progressive rock and some jazz releases may sound awkward when every song is separated by an automatic two-second pause. A single image with accurate index points preserves the intended flow, including transitions between tracks.

A cue file can also hold album and track metadata. Titles and performer names may appear in compatible players or become CD-Text when a disc is written. Do not rely on metadata alone, however. Track timing is determined by the index values, so careful listening and measurement are more important than attractive labels.

Prepare The Audio Rip

Start with a clean capture. For an LP, record both sides at the chosen sample rate and bit depth, then remove unwanted clicks or hum only if that forms part of your normal restoration process. Keep an untouched preservation copy before applying noise reduction, normalisation or fade-outs. For cassette transfers, check azimuth, levels and tape speed before recording; correcting those issues later is difficult.

You may create one image for each record side or join both sides into one album-length file. Separate sides are often easier to manage because the CUE sheet can point to more than one file, but a joined image gives a smoother representation of a continuous album. Name files simply, such as Artist - Album Side A.wav, and avoid changing the filename after creating the cue sheet.

Listen through the recording with headphones and note every track start. Audio editors can show the position in minutes, seconds and samples, while CD authoring programs usually display CD frames. A CD frame is 1/75 of a second, and cue times use the format MM:SS:FF. A start at 3 minutes, 12 seconds and 20 frames is written as 03:12:20.

Build The Basic Cue File

Open a plain-text editor rather than a word processor. Save the file in the same folder as the audio image and use the same base name, for example Album.wav and Album.cue. A simple single-file cue sheet can look like this:

PERFORMER "Example Artist"
TITLE "Example Album"
FILE "Example Album.wav" WAVE
  TRACK 01 AUDIO
    TITLE "Opening Song"
    PERFORMER "Example Artist"
    INDEX 01 00:00:00
  TRACK 02 AUDIO
    TITLE "Second Song"
    PERFORMER "Example Artist"
    INDEX 01 04:18:12

The FILE line identifies the audio source. Each TRACK line starts a new CD-audio track, and INDEX 01 marks the point at which that track begins. The first track normally starts at zero. Later positions must be measured from the beginning of the referenced audio file, not from the beginning of the previous song.

Quotation marks are useful when names contain spaces. Keep punctuation and spelling consistent with the album cover or your own catalogue. Some older programs have trouble with unusual characters, long filenames or non-standard text encoding, so plain English characters are the safest choice when compatibility is more important than decorative metadata.

The A Reny blog includes related audio and recording subjects that can be useful when comparing software workflows. Different applications accept slightly different cue-sheet features, so check the documentation for the program you intend to use before adding advanced commands.

Set Gaps And Indexes Carefully

Many albums can be represented with only INDEX 01 entries. If a track begins at 8 minutes and 45 seconds, with no additional frame fraction, write 08:45:00. Do not estimate from the printed running times if the songs overlap, because cover timings are often rounded and may omit silence.

A pre-gap can be represented with INDEX 00. This is the section immediately before the main track index and can contain silence or the start of a hidden transition. For example:

  TRACK 03 AUDIO
    TITLE "Third Song"
    INDEX 00 09:30:00
    INDEX 01 09:32:00

Some authoring programs handle the pre-gap automatically, while others interpret it differently. Test the result before deleting your source capture. If you are transferring an LP, remember that the physical gap between grooves may not equal the gap on a factory CD. Use the actual recording and your listening notes rather than trying to imitate a different release.

Mono records and tapes deserve particular attention. If a stereo capture contains the same signal on both channels, you may want to make a mono version before creating the final disc. Guidance on using a mono button explains why combining channels can reduce noise and improve focus for suitable older recordings. The cue sheet itself does not convert stereo to mono; that choice belongs in the audio-processing stage.

Check The Sheet Before Burning

A few quick checks catch most errors before a blank disc is used. Load the CUE file into your player or authoring program and compare every transition with the original recording. If the program reports a missing file, the filename or folder path usually does not match exactly.

Confirm The File And Metadata

  • Match the FILE name, extension and spelling to the actual audio file.
  • Check that every track has the correct title and performer.
  • Use WAVE for a WAV image and the syntax required by your software for other formats.
  • Confirm that track numbers increase in order without omissions.
  • Save the CUE sheet beside the audio file rather than in a separate temporary folder.

Listen for these practical timing problems before writing a disc. A song that begins too early may lose its first note, while a late index can leave an obvious burst of silence. Album sides captured separately also need sensible treatment at the side break, where the original medium may contain a lift of the tonearm or a pause before the cassette reverses.

Verify Playback And Timing

  • Play each track from its index point and listen for a clean start.
  • Compare total running time with the source, allowing for intentional silence.
  • Inspect any INDEX 00 entries for unwanted duplicated audio.
  • Test the cue file in a second compatible application when possible.
  • Keep the original capture untouched until the written disc has been checked.

Australian households often still have older stereo components, and a disc that works in a computer may expose problems in a standalone player. Test the finished CD in the intended equipment, whether that is a hi-fi in Melbourne, a portable player in Brisbane or a car stereo used for long drives between regional towns. Some older players are less forgiving of unusual disc formats and poorly supported CD-Text.

Burn, Archive And Reuse

When the cue sheet plays correctly, choose an audio-CD or disc-image project rather than a data-disc project. The authoring program should report the selected track boundaries and total duration. Use quality media and a moderate writing speed if your hardware provides that option. A disc written for personal listening is a copy of the prepared audio image; it is not a substitute for preserving the source files.

Keep the WAV or other lossless master, the CUE file and a text note describing the transfer. Include the source format, turntable or cassette deck, capture settings, restoration actions and date. Store at least one additional copy on a separate drive. Australian heat, dust and occasional power interruptions make sensible backup practice worthwhile, particularly for recordings that cannot easily be replaced.

Australian copyright law, including provisions in the Copyright Act 1968, has specific rules around certain private and domestic format-shifting activities. Those provisions have conditions and do not authorise uploading, selling or sharing copies. Keep transferred recordings for the permitted personal purpose, retain purchased originals where required, and avoid distributing the audio or cue package.

Once the file has been tested, a CUE sheet becomes a reusable map for the album. It can support a physical CD, gap-aware playback, later track extraction or a carefully catalogued archive. Review the timing, save the files together and make the next transfer easier by using the same naming and backup routine. Put the finished cue file beside its master recording and test it on the player where the album will actually be heard.

A dark, atmospheric portrait-style still-life suggesting a thoughtful older gentleman's study — worn leather, handwritten notes, and soft amber light against deep shadow.

About Allen

Allen is a retired French national who spent his career at the Laboratoire Régional des Ponts et Chaussées de Bordeaux, where he performed measurements on concrete and metal structures — building transducers, electronics interfaces, and the software to run them.

Now retired, he fills his days with fishing, listening to music, tinkering with HI-FI equipment, archery, computing, and — when possible — a well-earned siesta. He also enjoys transferring his vinyl record collection to CD.

Read the Blog

Stay in Touch

  • Practical electronics tips and guides
  • DIY vinyl-to-CD transfer know-how
  • Honest product comparisons
  • Bilingual content — English & French